2002 Touchkey
TO OBTAIN NEW TOUCHKEYS PLEASE CALL 01959 540405 WITH YOUR CREDIT CARD DETAILS
KEY CODING INSTRUCTIONS
WITH ORIGINAL TOUCH KEY AND IGNITION KEY
· Each APOLLO 2002 Immobiliser can learn to read 12 Touch Keys in total.
· Each Immobiliser has 1,048,576 code variants which are random selected.
· The unit has built in Anti- Scan automatic shut down for 30 seconds if a wrong key/code is detected.
Procedure |
Quick |
|
1. Disarm the immobiliser with the original touch key and remove from socket |
In / out
|
|
2. Turn acc/ignition on |
On
|
|
3. Insert original touch key in socket and remove |
In / out
|
|
4. Turn acc/ignition off |
Off
|
|
5. Put original touch key in socket and remove.
|
In / out |
|
6. Turn acc/ignition on for one short “chirp” which means you can start coding |
On |
|
7. Insert new touch key in socket long “chirp” means this key is now coded
|
In / out |
|
8. Remove new coded key from socket. Further keys can be coded up to a total of 12 within 15 seconds or turn acc/ignition off. The number of “chirps” that follow indicates the number of keys now coded. For coding out a lost or stolen key just programme a new key 11 times this will leave your existing key and only the new one coded. The lost/stolen key will be programmed out and unusable. You should hear only 2 chirps when you turn the acc/ignition off.
|
Off |
N.B. The Apollo 2002 is time sensitive for security reasons therefore:-
1. Procedures nos. 1 - 5 must be performed within 10 seconds
2. Procedures nos. 6 - 8 must be performed within 15 seconds
3. In the event of error the Apollo 2002 will require 20 seconds to re-set before the above process can re-commence.
Helpful hints: clean both original touch key and socket contacts. Use a key in each hand with the original touchkey removed from the ignition key ring. Leave ignition key in ignition barrel during coding. Have a watch with sweep second hand next to you.
In the event of difficulty phone our Technical Services on 01959 540405